CHARGING SYSTEM Noise Occurs from Generator while Engine is Running

INSPECTION PROCEDURE

PROCEDURE

1. CHECK V-RIBBED BELT FOR LOOSENESS

   
   

   1. Check the tension of the belt by pushing it down with a finger.

      OK
      The tension of the belt is correct.

   
   

   NG

   ADJUST V-RIBBED BELT Click here

   OK

2. CHECK V-RIBBED BELT FOR WEAR

   
   

   1. Check the V-ribbed belt for wear.

      OK
      The V-ribbed belt is not worn.

   
   

   NG

   REPLACE V-RIBBED BELT Click here

   OK

3. CHECK GENERATOR CLUTCH PULLEY FOR WEAR

   
   

   1. Check the clutch pulley grooves for wear or other defects.

      OK
      The clutch pulley grooves are not damaged.

   
   

   NG

   REPLACE GENERATOR CLUTCH PULLEY Click here

   OK

4. CHECK FOR NOISE WHILE GENERATOR CLUTCH PULLEY IS OPERATING

   
   

   1. Perform a driving test and check if noise occurs when decelerating.

      OK
      Noise does not occur.

   
   

   NG

   REPLACE GENERATOR CLUTCH PULLEY Click here

   OK

   REPLACE GENERATOR ASSEMBLY Click here