POWER SOURCE CONTROL ECU REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE RH

    A011AJ3

    1. Disengage the 9 claws and remove the front door scuff plate.

  2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  3. REMOVE COWL SIDE TRIM BOARD RH

    A0117YC

    1. Disengage the 2 claws and guide and remove the cowl side trim board.

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    A011ARPE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape, as shown in the illustration.

    2. A011BUZ

      Remove the <C> bolt.

    3. Disengage the 4 claws and 2 clips and remove the lower No. 2 instrument panel finish panel.

  5. REMOVE ECU INTEGRATION BOX RH

    A0118TD

    1. Disconnect the connectors.

    2. Remove the 2 screws and the ECU integration box.

  6. REMOVE POWER SOURCE CONTROL ECU (for LHD)

    A0118IC

    1. Disengage the 2 claws and remove the power management control ECU.

  7. REMOVE POWER SOURCE CONTROL ECU (for RHD)

    A0118RF

    1. Disengage the 2 claws and remove the power management control ECU.