POWER MANAGEMENT CONTROL ECU INSTALLATION


  1. INSTALL POWER MANAGEMENT CONTROL ECU (for LHD with Entry and Start System)

    A0118IC

    1. Engage the 2 claws and install the power management control ECU.

  2. INSTALL POWER MANAGEMENT CONTROL ECU (for LHD without Entry and Start System)

    A011ATY

    1. Engage the 2 claws and install the power management control ECU.

  3. INSTALL POWER MANAGEMENT CONTROL ECU (for RHD with Entry and Start System)

    A0118RF

    1. Engage the 2 claws and install the power management control ECU.

  4. INSTALL POWER MANAGEMENT CONTROL ECU (for RHD without Entry and Start System)

    A011AKN

    1. Engage the 2 claws and install the power management control ECU.

  5. INSTALL ECU INTEGRATION BOX RH

    A0118TD

    1. Install the ECU integration box with the 2 screws.

    2. Connect the connectors.

  6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    A011BUZ

    1. Engage the 4 claws and 2 clips.

    2. A011ARPE01
      Text in Illustration
      *1 Protective Tape

      Remove the protective tape.

    3. Install the lower No. 2 instrument panel with the <C> bolt.

  7. INSTALL COWL SIDE TRIM BOARD RH

    A0117YC

    1. Engage the guide and 2 claws and install the cowl side trim board.

  8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  9. INSTALL FRONT DOOR SCUFF PLATE RH

    A011AJ3

    1. Engage the 9 claws and install the front door scuff plate.