NOISE FILTER INSTALLATION


  1. INSTALL RADIO SETTING CONDENSER


    1. A011A4K

      Engage the claw and install a new terminal cover onto the wire harness.

    2. A011945

      Engage the 3 claws and install the terminal cover and the wire harness onto the condenser.

    3. A0118M1

      Engage the clamp to temporarily install the new radio setting condenser and the wire harness onto the back panel.

    4. Install the radio setting condenser with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  2. INSTALL SIDE NO. 1 TRIM ASSEMBLY LH

    Tech Tips

    Use the same procedures described for the RH side Click here.

  3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  4. INSTALL DECK TRIM SIDE BELT HOLE COVER LH

    Tech Tips

    Use the same procedures described for the RH side Click here

  5. INSTALL REAR DECK TRIM COVER

    A0116Z2

    1. Engage the 6 claws.

    2. Install the rear deck trim cover with the 2 clips.

  6. INSTALL FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedures described for the RH side Click here.

  7. INSTALL BOX ASSEMBLY


    1. A011BKK

      Set the deck board and lock the 2 knobs.