STEERING PAD SWITCH INSPECTION


  1. INSPECT STEERING PAD SWITCH LH

    A0119WLE01

    1. Check the resistance of the steering pad switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        10 (AU1) - 8 (EAU) All switches released 95 to 105 kΩ
        10 (AU1) - 8 (EAU) SEEK+ switch: pushed in Below 2.5 Ω
        10 (AU1) - 8 (EAU) SEEK- switch: pushed in 313 to 345 Ω
        10 (AU1) - 8 (EAU) VOL+ switch: pushed in 950 to 1050 Ω
        10 (AU1) - 8 (EAU) VOL- switch: pushed in 2955 to 3265 Ω
        9 (AU2) - 8 (EAU) All switches released 95 to 105 kΩ
        9 (AU2) - 8 (EAU) MODE switch: pushed in Below 2.5 Ω

        If the result is not as specified, replace the steering pad switch LH.