STEERING PAD SWITCH REMOVAL

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  2. REMOVE STEERING PAD ASSEMBLY

    A011BJC

    1. Using a thin-bladed screwdriver, push open the spring clips and disengage the pins.

      Note

      Lightly hold the horn button assembly to prevent it from falling.

    2. Pull the steering pad toward you.

    3. A0118YSE01

      Using a thin-bladed screwdriver, release the locking button.

    4. Using a thin-bladed screwdriver, disconnect the connector.

      Text in Illustration
      *1 Locking Button

    5. Detach the horn terminal.

  3. REMOVE STEERING PAD SWITCH LH


    1. A0119AA

      Disconnect the connector.

    2. Disconnect the wire harness.

    3. Remove the screw.

    4. Disengage the claw and the 2 pins.

    5. Remove the steering pad switch LH.