QUARTER TRIM SPEAKER INSTALLATION

Tech Tips

The procedure listed below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


  1. INSTALL REAR SPEAKER ASSEMBLY

    A0117K4

    1. Install the rear speaker with the 3 bolts.

    2. Connect the connector.

  2. INSTALL CENTER PILLAR UPPER GARNISH RH

    A011BPG

    1. Install 3 new clips to the center pillar upper garnish.

    2. Engage the 4 clips and install the center pillar upper garnish.

    3. Install the 2 clips.

  3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH

    A0119FW

    1. Install the front seat outer belt with the bolt.

      Torque:
      41 N*m  { 420 kgf*cm, 30 ft.*lbf }

  4. INSTALL SIDE NO. 1 TRIM ASSEMBLY RH

    A0119QR

    1. Engage the 6 clips and install the side No. 1 trim.

  5. INSTALL DECK TRIM SIDE BELT HOLE COVER RH

    A011AN1

    1. Engage the 5 claws and install the deck trim side belt hole cover.

  6. INSTALL REAR DECK TRIM COVER

    A0116Z2

    1. Engage the 6 claws.

    2. Install the rear deck trim cover with the 2 clips.

  7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  8. INSTALL FRONT DOOR SCUFF PLATE RH

    A011AJ3

    1. Engage the 9 claws and install the front door scuff plate.

  9. INSTALL REAR FLOOR BOARD SUB-ASSEMBLY (w/o Rear Seat)

    A0118Y8

    1. Install the rear floor board with the 6 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  10. INSTALL REAR SEAT ASSEMBLY

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }