STEERING COLUMN ASSEMBLY INSPECTION


  1. INSPECT PRELOAD


    1. Secure the steering column assembly in a vise.

    2. A0118I5E01

      Using SST, turn the main shaft and measure the preload.

      SST
      09616-00011
      Torque:
      Preload
      0.8 to 1.4 N*m  { 8.2 to 14.3 kgf*cm, 7.1 to 12.4 in.*lbf }

      If the preload is not as specified, replace the steering column assembly.

  2. INSPECT STEERING LOCK SYSTEM

    A0119LL

    1. Remove the key and check that the steering lock function is activated.

    2. A01196OE01
      Text in Illustration
      *1 START
      *2 ON
      *3 ACC
      *4 LOCK

      Insert the key, turn the ignition switch to ACC and check that the steering lock function is inactivated.