STEERING LOCK SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Perform troubleshooting in accordance with the following flowchart.


  • *: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  3. CHECK DTC*


    1. Check for DTC Click here.

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

      B

      Go to step 6
      A

  4. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table A
      Fault is listed in Problem Symptoms Table B

      B

      Go to step 6
      A

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU Click here.

    2. Data List/Active Test Click here.


      NEXT

  6. REPAIR OR REPLACE


    NEXT

  7. CONFIRMATION TEST*


    NEXT
    END