PARKING BRAKE SWITCH INSTALLATION


  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    1. A0117P2

      Install the parking brake switch assembly to the parking brake lever assembly with the screw.

      Torque:
      0.9 N*m  { 9 kgf*cm, 8 in.*lbf }

    2. Connect the connector to the parking brake switch assembly.

  2. INSPECT BRAKE WARNING LIGHT


    1. When operating the parking brake lever, check that the brake warning light illuminates.

      OK
      The brake warning light always illuminates at the first click.

  3. INSTALL REAR CONSOLE BOX ASSEMBLY

    A011B2F

    1. Engage the 2 front clips.

    2. Rotate the 2 rear clips in the direction indicated by the arrows to engage them and install the console box assembly RR.

  4. INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY (for Manual Transaxle)

    A0118HP

    1. Install the shifting hole cover onto the shift lever.

    2. Engage the 8 claws and install the console upper panel.

  5. INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY (for CVT)


    1. A0118XU

      Engage the 8 claws and install the console upper panel.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)