PARKING BRAKE SWITCH INSPECTION


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A0117DBE01
      Text in Illustration
      *1

      Component without harness connected

      (Parking Brake Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body ON (When shaft is not pressed) Below 1 Ω
      1 - Switch body OFF (When shaft is pressed) 10 kΩ or higher

      If the resistance is not as specified, replace the parking brake switch assembly.