REAR BRAKE (for Disc Type) DISASSEMBLY


  1. REMOVE REAR DISC BRAKE PISTON


    1. A011BF9E01

      Using SST, remove the piston by turning it counterclockwise.

      SST
      09960-10010   ( 09963-00400 )

      Note


      • Do not damage the piston.

      • Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. Remove the cylinder boot from the piston.

  3. REMOVE PISTON SEAL


    1. A0118NME04
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver, remove the piston seal from the rear disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG