FRONT BRAKE DISASSEMBLY


  1. REMOVE CYLINDER BOOT


    1. A011BNHE04

      Using a screwdriver, remove the cylinder boot set ring and cylinder boot from the disc brake cylinder.

      Note

      Be careful not to damage the brake piston or cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT DISC BRAKE PISTON


    1. A011BSME01

      Place a shop rag or a piece of cloth between the piston and disc brake cylinder.

    2. Apply compressed air to remove the piston from the disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not spatter the brake fluid.

  3. REMOVE PISTON SEAL


    1. A0118EWE04

      Using a screwdriver, remove the piston seal from the disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG