YAW RATE AND ACCELERATION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

    A0118HP

    1. Disengage the 8 claws and remove the console upper panel.

    2. Separate the shifting hole cover.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for CVT)

    A0118XU

    1. Disengage the 8 claws and remove the console upper panel.

  5. REMOVE YAW RATE AND ACCELERATION SENSOR


    1. A011825

      Disconnect the connector from the yaw rate and acceleration sensor.

    2. Remove the 2 bolts and yaw rate and acceleration sensor.