FRONT SPEED SENSOR REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD

    A011BPD

    1. Remove the 2 screws and front wheel opening extension pad.

  3. REMOVE FENDER REAR PLATE MUDGUARD

    A011973

    1. Remove the clip and screw.

    2. Remove the grommet and the fender rear plate mudguard.

      Tech Tips

      Replace the grommets with new ones if they are damaged during removal.

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY


    1. A011BS6

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A011BX5

      Remove the 7 clips.

    3. Remove the 3 grommets and remove the front fender splash shield.

      Tech Tips

      Replace the grommets with new ones if they are damaged during removal.

  5. SEPARATE WIRE HARNESS (for RH Side)


    1. A011BI3

      Disengage the clamp from the No. 3 sensor clamp.

  6. REMOVE FRONT SPEED SENSOR

    A01198WE01
    Text in Illustration
    *1 No. 1 Sensor Clamp *5 Bolt B
    *2 No. 2 Sensor Clamp *6 Bolt C
    *3 No. 3 Sensor Clamp *7 Nut
    *4 Bolt A *8 Speed Sensor Connector

    1. Disconnect the front speed sensor connector.

    2. Remove the nut and the No. 3 sensor clamp from the body.

    3. Remove the bolt C and separate the No. 2 sensor clamp from the shock absorber.

    4. Remove the bolt B and separate the brake flexible hose and No. 1 sensor clamp from the shock absorber.

    5. Remove the bolt A and the front speed sensor from the steering knuckle.

      Note


      • Prevent foreign matter from attaching to the sensor tip.

      • Clean the installation hole and the surface for the front speed sensor every time the front speed sensor is removed.