TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size Vehicle Speed Front Rear

      175/65R15 84S

      175/60R16 82H

      		 Driving below 160 km/h (100 mph)

      230 kPa (2.3 kgf/cm2, 33 psi)

      220 kPa (2.2 kgf/cm2, 32 psi)
      Driving over 160 km/h (100 mph)

      240 kPa (2.4 kgf/cm2, 35 psi)

      230 kPa (2.3 kgf/cm2, 33 psi)
    2. A0117OL

      Using a dial indicator, check the runout of the tires.

      Tire runout
      1.4 mm (0.0551 in.) or less (Vertical)
      2.0 mm (0.0787 in.) or less (Lateral)

  2. ROTATE TIRES

    Tech Tips

    Rotate the tires as shown in the illustration.

    A0118K9E03
    Text in Illustration
    *a Front

  3. INSPECT WHEEL BALANCE


    1. Check and perform off-car balancing.

    2. If required, perform on-car balancing.

      Imbalance after adjustment
      8.0 g (0.0176 lb.) or less

  4. INSPECT FRONT AXLE HUB BEARING

    Click here.

  5. INSPECT REAR AXLE HUB BEARING

    Click here.