REAR SHOCK ABSORBER REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE REAR COMBINATION LIGHT SERVICE COVER

  3. REMOVE REAR SHOCK ABSORBER CAP

  4. REMOVE REAR SHOCK ABSORBER ASSEMBLY


    1. Support the axle beam with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.

    2. A0118XB

      Hold the lower nut and loosen the upper nut.

    3. Remove the 2 nuts.

    4. Remove the cushion retainer and suspension support.

    5. A0118H4

      Remove the bolt while keeping the nut from rotating and remove the shock absorber.

      Note

      Remove the nut from the bolt side because the nut is a jam nut.

  5. REMOVE REAR SUSPENSION SUPPORT STOPPER

  6. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY