REVOLUTION SENSOR (NT SENSOR) INSTALLATION


  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR)


    1. Apply Toyota Genuine CVT Fluid TC to a new O-ring and install it on the transmission revolution sensor (NT).

    2. Install the transmission revolution sensor (NT) onto the CVT with a new bolt.

      Torque:
      4.4 N*m  { 45 kgf*cm, 39 in.*lbf }

    3. Connect the transmission revolution sensor connector (NT).

  2. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK


    1. Clean the area and check for fluid leaks.