OIL COOLER REMOVAL


  1. DRAIN ENGINE COOLANT

    A011ASWE01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly *3 Radiator Drain Cock Plug
    *2 Water Inlet Drain Cock Plug - -

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

    3. A0119WWE01
      Text in Illustration
      *1 Hose
      *2 Water Inlet Clip

      Connect the hose to the water inlet drain cock plug.

    4. Remove the water inlet clip.

    5. A0117FS

      Pull out the water inlet drain cock plug.

  2. REMOVE FRONT SUSPENSION MEMBER


    1. Remove the front suspension member ( Click here).

  3. REMOVE TRANSMISSION OIL COOLER ASSEMBLY


    1. A011B8V

      Slide the 2 clamps and separate the 2 water by-pass hoses from the transmission oil cooler.

    2. Remove the 3 bolts and then remove the transmission oil cooler from the CVT.

    3. Remove the 2 O-rings from the transmission oil cooler.