OIL PAN REMOVAL


  1. REMOVE NO. 2 ENGINE UNDER COVER

    A011B72

    1. Remove the 3 bolts and the engine under cover No. 2.

  2. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. A0118LF

      Using a socket hexagon wrench (6 mm), remove the drain plug and gasket and drain the fluid.

    2. A011AXNE01
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a socket hexagon wrench (6 mm), remove the No. 1 transmission oil filler tube and drain the fluid.

    3. Using a socket hexagon wrench (6 mm), install the No. 1 transmission oil filler tube.

      Torque:
      0.8 N*m  { 8.2 kgf*cm, 7 in.*lbf }

    4. Install a gasket and temporarily tighten the drain plug with a socket hexagon wrench (6 mm).

      Tech Tips

      Because the drain plug will be removed again, the gasket can be reused at this time.

  3. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A0119UW

      Remove the bolt from the CVT.

    2. A011AWE

      Remove the 15 bolts and the transaxle oil pan.

    3. Remove the transaxle oil pan gasket and 2 oil cleaner magnets from the oil pan.

      Note


      • Remove any metal particles and clean sludge from the inside of the oil pan.

      • Remove all metal particles from the oil cleaner magnet.