PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A011AKJ

      Move the shift lever to N.

    2. Remove the nut and disconnect the transmission control cable from the transmission control shaft lever.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A0119OC

      Disconnect the park/neutral position switch connector.

    2. A011B89

      Remove the nut, the spring washer and the transmission control shaft lever.

    3. A011A7G

      Bend down the tabs of the nut stopper with a screwdriver and remove the lock nut and the nut stopper.

    4. A0118OP

      Remove the 2 bolts and the park/neutral position switch.