REVOLUTION SENSOR (NOUT SENSOR) INSTALLATION


  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT SENSOR)


    1. Apply a light coat of Toyota Genuine CVT fluid FE to a new O-ring and install it to the transmission revolution sensor (NOUT).

      Note

      Do not twist the O-ring.

    2. Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with a new bolt.

      Torque:
      4.4 N*m  { 45 kgf*cm, 39 in.*lbf }

      Note

      Make sure that the O-ring is not cracked or moved out of place when installing the transmission revolution sensor (NOUT).

    3. Connect the transmission revolution sensor (NOUT) connector.

  2. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  3. INSTALL AIR CLEANER AND HOSE

    A0119MCE01
    Text in Illustration
    *1 Clamp
    *2 Guide

    1. Align the 2 hinges with the case guide, to insert the case into the groove, and engage the 2 clamps to install the air cleaner cap.

    2. Connect the air cleaner hose with the hose clamp.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

      Tech Tips

      Install the clip as shown in the illustration.

    3. Connect the ventilation hose with the clip

      Tech Tips

      Install the clip as shown in the illustration.

  4. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK


    1. Clean the area and check for fluid leaks.