DIFFERENTIAL OIL SEAL REPLACEMENT


  1. DRAIN MANUAL TRANSAXLE OIL

    A0117FFE01
    Text in Illustration
    *1 Filler plug
    *2 Drain plug

    1. Stop the vehicle in a level place.

    2. Remove the manual transmission filler plug and the gasket.

    3. Remove the manual transmission drain plug and gasket, and then drain the manual transaxle oil.

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLIES


    1. Remove the front drive shaft assemblies Click here.

  3. REMOVE TRANSMISSION CASE OIL SEAL


    1. A0119CIE01
      Text in Illustration
      *1 Transmission case oil seal

      Using SST, remove the transmission case oil seal.

      SST
      09308-00010

  4. REMOVE TRANSAXLE CASE OIL SEAL


    1. A0116WNE01
      Text in Illustration
      *1 Transaxle case oil seal

      Using SST, remove the transaxle case oil seal.

      SST
      09308-00010

  5. INSTALL TRANSMISSION CASE OIL SEAL

    A011AXCE01
    Text in Illustration
    *1 Installation depth

    1. Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, install the transmission case oil seal.

      SST
      09316-60011   ( 09316-00011 )
      Installation depth
      10.6 to 11.6 mm (0.417 to 0.457 in.)

      Note

      Do not damage the oil seal lip.

  6. INSTALL TRANSAXLE CASE OIL SEAL

    A011ADME01
    Text in Illustration
    *1 Installation depth

    1. Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, install the transaxle case oil seal.

      SST
      09630-24014   ( 09620-24051 )
      09950-60010   ( 09951-00410, 09951-00520, 09952-06010 )
      09950-70010   ( 09951-07100 )
      Installation depth
      1.4 to 2.4 mm (0.055 to 0.094 in.)

      Note

      Do not damage the oil seal lip.

  7. INSTALL FRONT DRIVE SHAFT ASSEMBLIES


    1. Install the front drive shaft assemblies Click here.

  8. ADD MANUAL TRANSAXLE OIL


    1. Install a new gasket and the manual transmission drain plug.

      Torque:
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }
    2. A011B4NE40
      Text in Illustration
      *1 0 to 5 mm (0 to 0.20 in.)

      Add manual transaxle oil.

  9. INSPECT MANUAL TRANSAXLE OIL


    1. A011B4NE40
      Text in Illustration
      *1 0 to 5 mm (0 to 0.20 in.)

      Check that the oil surface is within 5 mm (0.20 in.) of the bottom of the manual transmission filler plug opening.

      Note

      Excessively large or small amounts of oil may cause problems.

    2. Check for oil leakage when the oil level is low.

    3. A01194DE01
      Text in Illustration
      *1 Filler plug

      Install the manual transmission filler plug and a new gasket.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }