BACK-UP LIGHT SWITCH INSTALLATION


  1. INSTALL BACK UP LIGHT SWITCH ASSEMBLY


    1. A011B8TE01

      Using SST, install the back up light switch with a new gasket onto the manual transaxle.

      SST
      09817-16011
      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

    2. Connect the back up light switch connector and install the wire harness clamps.

  2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A011BL0E01

      Install the 2 new clips <B> onto the transmission control cable.

    2. Connect the transmission control cable with the 2 clips <A> onto the transaxle.