SHIFT AND SELECT LEVER SHAFT REASSEMBLY


  1. INSTALL SELECT STOPPER BLOCK


    1. Coat the select stopper block with gear oil.

    2. A011BM6E01

      Make sure that the select stopper block is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    3. A0118XGE02
      Text in Illustration
      *a Driven in depth

      Using a pin punch 5 mm and a hammer, install the slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  2. INSTALL RELEASE HEAD STRAIGHT PIN


    1. A011AK6

      Install the release head straight pin to the select stopper block.

    2. Coat the release head with gear oil.

    3. A0119ISE01

      Make sure that the release head is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    4. A0118GAE01

      Make sure that the release head torsion spring is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    5. Coat the front inner shift lever with gear oil.

    6. A0117U5E01

      Make sure that the front inner shift lever is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

      Tech Tips

      Insert the torsion spring to the installation hole of the front inner shift lever.

    7. Turn the front inner shift lever clockwise to align it with the installation surface of the straight pin, and install it.

      Text in Illustration
      *1 Spring
      *2 Straight Pin

      Note

      Make sure that the front shift lever is installed as shown in the illustration.

    8. A0118N3E02
      Text in Illustration
      *a Driven in depth

      Using a pin punch 5 mm and a hammer, install the slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  3. INSTALL INNER NO. 2 SHIFT LEVER


    1. Coat the inner No. 2 shift lever with gear oil.

    2. A0119C8E02
      Text in Illustration
      *a Driven in depth

      Using a pin punch 5 mm and a hammer, install the inner No. 2 shift lever and slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      0 to 0.6 mm (0 to 0.0236 in.)

      Note

      Make sure of the installation direction.