CLUTCH MASTER CYLINDER (for LHD) REMOVAL


  1. REMOVE KNEE AIR BAG ASSEMBLY


    1. Remove the knee air bag assembly Click here.

  2. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01180N

      Disconnect the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

    2. Using a union nut wrench 10 mm, disconnect the flexible hose tube.

      Tech Tips

      Use a container to collect the fluid.

    3. Remove the clutch pedal spring from the push rod clevis pin.

    4. A0118QYE01
      Text in Illustration
      *1 Push rod clevis pin
      *2 Clip

      Remove the clip and push rod clevis pin from the clutch pedal.

    5. Remove the 2 nuts and the clutch master cylinder.

    6. A0119R4E03
      Text in Illustration
      *1 Adjusting nut
      *2 Push rod clevis

      Measure the dimension A as shown in the illustration before loosening the adjusting nut.