CLUTCH PEDAL (for RHD) REMOVAL


  1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. Remove the clutch master cylinder assembly Click here.

  2. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

    A01191X

    1. Disconnect the connectors and separate the wire harness clamps from the clutch pedal support.

    2. Remove the 2 bolts and the clutch pedal support.

  3. REMOVE CLUTCH START SWITCH ASSEMBLY

    A0119PG

    1. Remove the nut and the clutch start switch.

  4. REMOVE CLUTCH SWITCH ASSEMBLY


    1. A0118XKE01
      Text in Illustration
      *1 Turn
      *2 Adjusting nut

      Loosen the adjusting nut.

    2. Turn the clutch switch by counterclockwise and remove the clutch switch.

  5. REMOVE PEDAL W/HOOK SPRING (for 1ND-TV)

    A0117IKE01
    Text in Illustration
    *1 Tension spring
    *2 Spring hook
    *3 No. 1 pedal spring hook

    1. Remove the tension spring.

    2. Remove the spring hook from the clutch pedal.

    3. Disengage the 2 claws and remove the No. 1 pedal spring hook.

  6. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING (for 1ND-TV)

    A0117C2E01
    Text in Illustration
    *1 Turn over spring seat compression spring
    *2 Clutch pedal spring holder
    *3 Clutch pedal turnover bush

    1. Remove the turn over spring seat compression spring.

    2. Remove the clutch pedal spring holder from the clutch pedal support.

    3. Remove the clutch pedal turnover bush from the clutch pedal.

  7. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

    A0117VK

    1. Remove the nut and clutch pedal shaft from the clutch pedal support.

    2. Remove the clutch pedal from the clutch pedal support.

  8. REMOVE CLUTCH PEDAL SHAFT COLLAR

    A01170ME01
    Text in Illustration
    *1 Clutch pedal bush
    *2 Clutch pedal shaft collar

    1. Remove the 2 clutch pedal bushes and the clutch pedal collar from the clutch pedal.

  9. REMOVE NO. 1 CLUTCH PEDAL CUSHION

    A011A9Z

    1. Remove the 2 No. 1 clutch pedal cushions from the clutch pedal.

  10. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

    A0117VW

    1. Using an 8 mm hexagon wrench and a hammer, remove the clutch master cylinder push rod clevis bush.

  11. REMOVE CLUTCH PEDAL PAD


    1. Remove the clutch pedal pad from the clutch pedal.