EXPRESSIONS OF IGNITION SWITCH
Tech Tips
The type of ignition switch used on this model differs according to the specifications of the vehicle.
The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition switch off | LOCK | Off |
| Ignition switch ACC | ACC | On (ACC) |
| Ignition switch ON | ON | On (IG) |
| Engine Start | START | Start |
USING BATTERY DURING INSPECTION
While using a battery during inspections, do not bring the positive and negative probes too close to each other as a short circuit may occur.
PRECAUTION FOR BATTERY REPLACEMENT
Note
When the vehicle has not been used for a long period, the battery capacity decreases, and stop and start control is disabled. In this case, after charging the battery, clear the integrated current and run the vehicle for about 15 to 40 minutes.
Tech Tips
When the battery terminal is disconnected, since stop and start control is prohibited, run the vehicle for 15 to 40 minutes until stop and start control is enabled.