ENGINE SWITCH (w/ Entry and Start System) INSTALLATION


  1. INSTALL ENGINE SWITCH


    1. Engage the 2 claws to install the engine switch.

    2. Connect the engine switch connector.

  2. INSTALL LOWER STEERING COLUMN COVER

    Note

    Installing the lower steering column cover in the incorrect order will cause the lower steering column cover to break, resulting in clearance between the upper steering column cover and lower steering column cover.


    1. A011AVM

      Engage the 2 claws.

    2. A011BTR

      Engage the 3 claws and install the lower steering column cover.

      Note

      Press the area around the claw to engage it.

  3. INSTALL STEERING COLUMN COVER SUPPORT

    A0119HO

    1. Engage the 4 claws and install the steering column cover support.