STARTER (w/o Stop And Start System) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A011B3Q

      Remove the 2 bolts and the 2 compression springs, and disconnect the front exhaust pipe assembly from the tail exhaust pipe assembly.

    2. A011ANS

      Remove the 2 bolts and the 2 compression springs, and the front exhaust pipe assembly from the exhaust manifold.

  3. REMOVE FLYWHEEL HOUSING SIDE COVER


    1. A0119QU

      Disengage the claw by pulling it outward and remove the flywheel housing side cover.

  4. REMOVE STARTER ASSEMBLY


    1. A011B34

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the connector.

    4. A0117YV

      Remove the 2 bolts and the starter assembly.