OIL PRESSURE SWITCH INSTALLATION


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A011AFOE03
      Text in Illustration
      *1 Adhesive

      Apply adhesive to 2 or 3 threads of the oil pressure switch.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.
    2. A0119YSE01
      Text in Illustration
      *1 24 mm Deep Socket Wrench

      Using a 24 mm deep socket wrench, install the oil pressure switch.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Do not start the engine for at least 1 hour after installation.

    3. Connect the oil pressure switch connector.

  2. INSTALL COOLER COMPRESSOR ASSEMBLY


    1. Install the cooler compressor assembly Click here.