IGNITION SWITCH REMOVAL


  1. REMOVE STEERING COLUMN ASSEMBLY


    1. Remove the steering column assembly Click here.

  2. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY


    1. Fix the steering post assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using a drill, drill a hole in each of the steering lock set bolt, to insert a screw extractor.

    3. A01190J

      Using the screw extractor, remove the steering lock set bolt and remove the steering column upper with switch bracket assembly and steering column clamp upper.

  3. REMOVE IGNITION SWITCH ASSEMBLY


    1. A01197E

      Remove the 2 screws and ignition switch.