WATER PUMP REMOVAL


  1. DRAIN ENGINE COOLANT (w/ Water Inlet Drain Cock Plug)

    A011ASWE01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly *3 Radiator Drain Cock Plug
    *2 Water Inlet Drain Cock Plug - -

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

    3. A0119WWE01
      Text in Illustration
      *1 Hose
      *2 Water Inlet Clip

      Connect the hose to the water inlet drain cock plug.

    4. Remove the water inlet clip.

    5. A0117FS

      Pull out the water inlet drain cock plug.

  2. DRAIN ENGINE COOLANT (w/o Water Inlet Drain Cock Plug)

    A011776E01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly
    *2 Radiator Drain Cock Plug

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

  3. REMOVE GENERATOR ASSEMBLY

    Click here

  4. REMOVE ENGINE WATER PUMP ASSEMBLY

    A0118LG

    1. Remove the 5 bolts and the engine water pump.

    2. A0116XO

      Remove the gasket from the timing chain cover.