EGR COOLER INSTALLATION


  1. INSTALL EGR PIPE CONNECTOR


    1. A011BBB

      Install the 2 gaskets and EGR by-pass valve to the EGR with cooler pipe assembly.

    2. Install the EGR pipe connector with the bolt and 2 nuts.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

  2. INSTALL EGR WITH COOLER PIPE ASSEMBLY


    1. A0118NA

      Install 2 new gaskets.

    2. Install the EGR cooler assembly with the 4 bolts and 2 nuts.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }
    3. A0118U8

      Install the No. 1 vacuum transmitting pipe sub-assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
    4. A0118OME01

      Connect the vacuum hose, No. 2 oil cooler hose and No. 2 water by-pass hose.

    5. A011AWW

      Engage the 2 wire harness clamps and connect the 2 connectors.

    6. Install the wire harness with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    7. A011B7X

      Engage the wire harness clamp and connect the 2 connectors.

  3. INSTALL ENGINE COVER ASSEMBLY


    1. A011ACJ

      Engage the 3 claws and install the engine cover.

  4. INSTALL AIR CLEANER HOSE ASSEMBLY

    A0119ZOE02
    Text in Illustration
    *1 Paint Mark

    1. Install the air cleaner hose.

      Note

      Position the clip so that the claws are centered over the paint mark on the hose.

  5. INSTALL RADIATOR ASSEMBLY


    1. Install the radiator assembly Click here.

  6. INSPECT FOR EXHAUST GAS LEAK