FUEL INJECTOR REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge the fuel system pressure Click here.

  2. REMOVE INTAKE MANIFOLD


    1. Remove the intake manifold Click here.

  3. REMOVE EFI FUEL PIPE CLAMP


    1. A011A4U

      Remove the EFI fuel pipe clamp.

  4. DISCONNECT FUEL TUBE SUB-ASSEMBLY


    1. A011B3L

      Pinch the tube connector and pull out the fuel pipe.

      Note


      • Check for dirt or other foreign matter on the parts to be disconnected and clean them if necessary.

      • The fuel tube connector seals with an O-ring. Ensure that there is no damage or foreign matter on the contact surface.

      • If the connector and the pipe are stuck, push and pull on the connector to release them while pinching the retainer. Pull the connector out of the pipe carefully.

      • Do not use any tools.

      • Do not bend or twist the tubes.

      • Protect the contact surface by covering it with a plastic bag.

      • Do not damage any of the clips. If a clip is damaged, replace it.

  5. REMOVE FUEL DELIVERY PIPE


    1. A011BP1

      Disconnect the 4 fuel injector assembly connectors.

    2. A011889

      Remove the 2 bolts and delivery pipe together with the 4 injectors.

      Note

      Do not drop the fuel injectors when removing the fuel delivery pipe.

  6. REMOVE FUEL INJECTOR ASSEMBLY


    1. A01175T

      Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.

    2. A011740

      For reinstallation, attach a tag or label to each injector shaft.

      Note

      Prevent entry of foreign objects by covering the fuel injectors with plastic bags.

  7. REMOVE NO. 1 DELIVERY PIPE SPACER


    1. A0117T9

      Remove the 2 No. 1 delivery pipe spacers from the cylinder head.

  8. REMOVE INJECTOR VIBRATION INSULATOR


    1. A0117ZB

      Remove the 4 injector vibration insulators.