FUEL SEDIMENTER WARNING SWITCH REMOVAL


  1. REMOVE COWL PANEL SUB-ASSEMBLY


    1. Remove the cowl panel sub-assembly Click here.

  2. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A011ADE

      Remove the 2 nuts and the battery clamp.

  3. REMOVE BATTERY

  4. REMOVE FUEL FILTER ASSEMBLY


    1. A011B6X

      Disconnect the 2 wire harness clamps.

    2. Disconnect the connector.

    3. A011A0C

      Disconnect the 2 connectors.

    4. A0119HL

      Disconnect the 2 fuel hose clamps from the fuel filter.

    5. Disconnect the 2 fuel hoses.

    6. A011BBN

      Loosen the fuel filter drain plug to drain fuel.

    7. Tighten the fuel filter drain plug.

    8. A0118XZ

      Remove the 2 nuts and fuel filter.

  5. REMOVE FUEL FILTER SUPPORT


    1. A0119UD

      Disconnect the 2 clamps.

    2. Remove the bolt and fuel filter support.

  6. REMOVE LEVEL WARNING SWITCH


    1. A011ARJ

      Clamp the fuel filter cap in a soft jaw vise.

    2. Using pliers, remove the level warning switch.

      Note

      Do not damage the level warning switch.