FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAGE ASSEMBLY


    1. A0118WHE01

      Check the fuel sender gauge operation.


      1. Check that the float moves smoothly between the F level (upper end) and E level (lower end).

        OK
        The float moves smoothly.
    2. A0119ZSE01
      Text in Illustration
      *1

      Component without harness connected

      (Fuel sender gauge)

      Check the fuel sender gauge resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 F (Upper End) 161 to 169 Ω
        1 - 2 E (Lower End) 405 to 415 Ω
        1 - 2 F (Upper End) - E (Lower End) The resistance changes smoothly

        If the result is not as specified, replace the fuel sender gauge assembly.