REMOVE FUEL PUMP HARNESS
Note
Do not disconnect the tube shown in the illustration.
Disconnect the 2 fuel pump harness connectors and remove the fuel pump harness.
Note
Do not damage the wire harness.
REMOVE NO. 2 FUEL SUCTION SUPPORT
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 2 fuel suction support.
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disconnect the pressure regulator from the fuel suction plate.
Note
Slowly pull out the fuel pressure regulator assembly, because the O-ring is firmly installed between the fuel suction plate and the fuel pressure regulator.
Remove the 2 O-rings from the pressure regulator.
REMOVE FUEL PUMP FILTER
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the fuel pump filter.
Remove the O-ring from the fuel pump.
REMOVE FUEL PUMP
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws.
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the fuel pump.
Remove the O-ring from the fuel suction plate.
Remove the fuel pump spacer from the fuel pump.
Disengage the claw.
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the jet pump from the fuel pump.
Remove the O-ring from the jet pump.
REMOVE NO. 2 FUEL TANK CUSHION
Remove the No. 2 fuel tank cushion.