REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY (for CVT)

    Click here

  2. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle)

    Click here

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for CVT)


    1. A01187DE01

      Using SST, hold the crankshaft.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )
    2. A01189T

      Remove the 8 bolts, the rear drive plate spacer, the drive plate and the front drive plate spacer.

  4. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A01187DE01

      Using SST, hold the crankshaft.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )
    2. A0119G3

      Remove the 8 bolts and the flywheel sub-assembly.

  5. REMOVE REAR ENGINE OIL SEAL


    1. A01170VE10
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the oil seal lip.

    2. Using a screwdriver with its tip wrapped with protective tape, pry out the rear engine oil seal.