DRIVE BELT REMOVAL


  1. REMOVE NO. 3 ENGINE UNDER COVER

    A0118DM

    1. Remove the 3 clips and the No. 3 engine under cover.

  2. REMOVE NO. 1 V-RIBBED (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)

    A0117S5E01
    Text in Illustration
    *1 Bolt A
    *2 Adjusting Bolt B

    1. Loosen the bolt A.

    2. Turn adjusting bolt B to release the tension and remove the No. 1 V-ribbed belt from the pulleys.

  3. REMOVE FAN AND GENERATOR V-RIBBED BELT

    A0118F1E01
    Text in Illustration
    *1 4 mm Bi-hexagon Wrench
    *a Turn

    1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align the holes, and then insert a 4 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner in place.