ENGINE COOLANT TEMPERATURE SENSOR REMOVAL


  1. DRAIN ENGINE COOLANT

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and radiator assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.

    A011B1KE01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly *2 Radiator Drain Cock Plug
    *3 Air Bleed Valve - -

    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

    A0119T1

    1. Disconnect the engine coolant temperature sensor connector.

    2. A0119TGE01
      Text in Illustration
      *1 19 mm Deep Socket Wrench

      Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket.