CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. A0118BR

      Apply a light coat of engine oil to the O-ring.

    2. Install the crankshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked and does not jump out of position during installation.

    3. Connect the crankshaft position sensor connector.

  2. INSTALL CRANKSHAFT PULLEY


    1. Install the crankshaft pulley Click here.

  3. INSPECT FOR ENGINE OIL LEAK