AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A011BB9E01
      Text in Illustration
      *1 Fulcrum length

      Using SST, install the air fuel ratio sensor.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • This torque value is effective when SST is parallel to the torque wrench.

    2. A0119BY

      Engage the 3 wire harness clamps and install the air fuel ratio sensor wire harness.

    3. Connect the air fuel ratio sensor connector.

  2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Install the windshield wiper motor and link assembly Click here.