CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR


    1. A011A6A

      Install the camshaft position sensor with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the camshaft position sensor connector.

    3. A01194U

      Engage the wire harness clamp and install the wire harness.

    4. Connect the injector connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A011AXX

      Install the air cleaner case with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. A011BX8

      Install the air cleaner filter element.

      Note

      Engage the air cleaner filter element protrusion with the air cleaner case groove.

  4. INSTALL AIR CLEANER CAP ASSEMBLY


    1. A0119FRE01

      Engage the 2 claws and 2 clamps and install the air cleaner cap.

    2. Connect the connector and 2 wire harness clamps.

      Text in Illustration
      *1 Wire harness clamp
      *2 Clamp
    3. A0118S5E01

      Connect the air cleaner hose to the air cleaner cap.

      Tech Tips


      • The clamp should contact the air cleaner hose stopper.

      • Make sure that the air cleaner hose recession is securely engaged with the air cleaner cap protrusion.

  5. INSTALL ENGINE COVER ASSEMBLY


    1. A011ACJ

      Engage the 3 claws and install the engine cover.