ACCELERATOR PEDAL ON-VEHICLE INSPECTION


  1. INSPECT ACCELERATOR PEDAL ASSEMBLY


    1. Connect an intelligent tester to the DLC3.

    2. Turn the ignition switch to ON and turn the tester on.

    3. Enter the following menus: Powertrain / Engine and ECT / Data List / Accel Position.

    4. While the accelerator pedal is depressed and released, check that the values of Accel position are within the specifications.

      Accelerator Pedal Position No. 1 Standard Voltage
      Condition Specified Condition
      Accelerator pedal released 0.5 to 1.1 V
      Accelerator pedal depressed 2.6 to 4.5 V
      Accelerator Pedal Position No. 2 Standard Voltage
      Condition Specified Condition
      Accelerator pedal released 1.2 to 2.0 V
      Accelerator pedal depressed 3.4 to 5.0 V

      Tech Tips

      If the results are not as specified, check the accelerator pedal, wire harness and ECM.