AIR FUEL RATIO SENSOR INSPECTION


  1. INSPECT AIR FUEL RATIO SENSOR

    A011BJFE23
    Text in Illustration
    *1

    Component without harness connected

    (Air Fuel Ratio Sensor)

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HA1A) - 2 (+B) 20 °C (68 °F) 2.64 to 2.9 Ω
        1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher

        If the result is not as specified, replace the air fuel ratio sensor.