ENGINE COOLANT TEMPERATURE SENSOR REMOVAL


  1. DRAIN ENGINE COOLANT

    A011776E01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly
    *2 Radiator Drain Cock Plug

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

    A0117I1

    1. Disconnect the coolant temperature sensor connector.

    2. A011A46E01
      Text in Illustration
      *1 19 mm deep socket wrench

      Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket.