THROTTLE BODY REMOVAL


  1. DRAIN ENGINE COOLANT

    A011776E01
    Text in Illustration
    *1 Water Filler Cap Sub-assembly
    *2 Radiator Drain Cock Plug

    CAUTION:

    To avoid the danger of being burned, do not remove the water filler cap sub-assembly while the engine and assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the water filler cap sub-assembly.

  2. REMOVE AIR CLEANER HOSE

    A011AQM

    1. Separate the No. 2 ventilation hose.

    2. Loosen the 2 clamps and remove the air cleaner hose.

  3. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

    A0119I7

    1. Disconnect the 2 water by-pass hoses.

    2. A0118JN

      Disconnect the throttle body connector.

    3. A011B0I

      Remove the 3 bolts, nut and the throttle body.

    4. Remove the gasket from the intake manifold.