1ND-TV ENGINE CONTROL SERVICE DATA

Diesel throttle body assembly Resistance Standard 1 (M-) - 2 (M+) 0.3 to 100 Ω at 20 °C (68 °F)
Accelerator pedal position No. 1 standard voltage Voltage Standard Accelerator pedal released 0.5 to 1.1 V
Accelerator pedal depressed 2.6 to 4.5 V
Accelerator pedal position No. 2 standard voltage Voltage Standard Accelerator pedal released 1.2 to 2.0 V
Accelerator pedal depressed 3.4 to 5.0 V
Mass air flow meter Resistance Standard 4 (THA) - 5 (E2)

12.5 to 16.9 kΩ at -20 °C (-4 °F)

2.19 to 2.67 kΩ at 20 °C (68 °F)

0.50 to 0.68 kΩ at 60 °C (140 °F)
Camshaft position sensor Resistance Standard 1 - 2 950 to 1250 Ω at 20 °C (68 °F)
Crankshaft position sensor Resistance Standard 1 - 2 1850 to 2450 Ω at 20 °C (68 °F)
Engine coolant temperature sensor Resistance Standard 1 (E2) - 2 (THW) 2.32 to 2.59 kΩ at 20 °C (68 °F)
0.310 to 0.326 kΩ at 80 °C (176 °F)
Intake air temperature sensor Resistance Standard 1 - 2

2.21 to 2.65 kΩ (Approximately 20 °C (68 °F))

0.54 to 0.62 kΩ (Approximately 60 °C (140 °F))
Diesel turbo turbo pressure sensor (Front of wire harness connector) Resistance Standard 3 (VC) - 1 (E2) 4.5 to 5.5 V (Engine switch on (IG))
Air fuel ratio sensor Resistance Standard 5 (H-) - 2 (+B) 2 to 5 Ω at 20 °C (68 °F)
5 (H-) - 4 (AF1+) 10 kΩ or higher
Integration relay (ECD Relay) Resistance Standard A1 - B1 10 kΩ or higher (Battery voltage not applied between E8 - E1 terminals)
A1 - B5
A1 - B5
A1 - E5
A1 - E6
A1 - E7
A1 - F6
A1 - F7
A1 - F9
A1 - F10
A1 - F11
A1 - B1 Below 1 Ω (Battery voltage applied between E8 - E1 terminals)
A1 - B5
A1 - B5
A1 - E5
A1 - E6
A1 - E7
A1 - F6
A1 - F7
A1 - F9
A1 - F10
A1 - F11
Integration relay (IG2 Relay) Resistance Standard A1 - B7 10 kΩ or higher (Battery voltage not applied between D12 - B4 terminals)
A1 - D1
A1 - B7 Below 1 Ω (Battery voltage applied between D12 - B4 terminals)
A1 - D1