FRONT DOOR BELT MOULDING INSTALLATION


  1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

    A011ARY

    1. Engage the 6 claws and install a new front door glass outer weatherstrip.

    2. Remove the protective tape.

  2. INSTALL FRONT DOOR WINDOW FRAME REAR MOULDING


    1. Clean the attachment surface.


      1. Using an infrared light, heat the adhesive remaining on the body.

        CAUTION:

        Do not burn yourself with the heated body or infrared light.

      2. Using a piece of cloth, rub the remaining adhesive off the body.

      3. Using a non-residue solvent, clean the attachment surface.

    2. Remove the double-sided tape of the front door window frame rear moulding.

    3. A0119O4E02
      Text in Illustration
      *A for Type A
      *B for Type B

      Engage the 3 clips and install the front door window frame rear moulding.

      Note

      Thoroughly press the front door window frame moulding to ensure that it adheres.

  3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    1. A0117HI

      Install the outer rear view mirror assembly with the 3 screws.

      Torque:
      11 N*m  { 107 kgf*cm, 8 ft.*lbf }

    2. Connect the connector.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the RH side Click here.

  5. INSTALL DOOR ASSIST GRIP COVER

    Tech Tips

    Use the same procedure as for the RH side Click here.

  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL

    Tech Tips

    Use the same procedure as for the RH side Click here.

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Tech Tips

    Use the same procedure as for the RH side Click here.

  8. INSTALL FRONT ARMREST BASE UPPER PANEL (w/o Screw)

    Tech Tips

    Use the same procedure as for the RH side Click here.

  9. INSTALL FRONT ARMREST BASE UPPER PANEL (w/ Screw)

    Tech Tips

    Use the same procedure as for the RH side Click here.